SAVANTEC discarding combined deburring and chamfering cutter is made by customizing non-standard cutter arbor on the basis of our standard cutter and making small modifications on the standard discarding deburring and chamfering cutter. The machining aperture size is a diameter value greater than 25mm. It is a deburring and chamfering knife for large diameter orifice
SAVANTEC discarding combined deburring and chamfering cutter
SAVANTEC disposable combined deburring and chamfering cutter is made by customizing non-standard cutter arbor on the basis of our standard cutter and making small modifications on the standard discarding deburring and chamfering cutter. The machining aperture size is a diameter value greater than 25mm.
The combined cutter is a deburring and chamfering cutter for large diameter orifice.
The cutter arbor of the combined deburring and chamfering tool is non-standard customized, embedded with our standard discarding deburring and chamfering tool.
You can click the following picture to download our PDF diagram, and design the large-diameter deburring and chamfering tool you need according to your hole diameter and hole depth.。
The simple design of deburring and chamfering cutter on the front and back sides is suitable for improving deburring efficiency and stabilizing production. The tool does not require a complex or time-consuming preset process. The diameter of the drill hole determines the size of the tool bar required. The size of the chamfer can be adjusted by the adjusting screw at the tail and the feed rate
It is a company integrating tool R & D, production and sales, specializing in deburring tools and flexible floating tools
簡體中文 
